Dual-Action Red Backing Plate  (3 inch)
Click To Enlarge

Why Buy This Product?

  • Small 3'' dual action polisher backing plate
  • Perfect for polishing small areas and hard-to-reach spots
  • Fits any DA polisher that accepts 5/16’’ - 24 spindle accessories
  • TORQ10FX, TORQX, Porter Cable 7424XP, Griot’s 6’’, Meguiar’s G110, Meguiar’s MT300
  • Hyper-Flex Technology conforms to all automotive curves and contours
  • Delivers finer results in less time and less energy
  • Cooling channels funnel in fresh air to cool the backing plate, buffing pad, machine, and painted surface
  • Reduces wear and tear on the backing plate, buffing pad, and machine

Compact Backing Plate For Hard To Reach Spots

TORQ Tools designed high performance backing plates for finer finishing and faster results on every polishing job. The R5 Dual Action Polisher Backing Plate with Hyper Flex Technology works on any DA machine that accepts 5/16’’ - 24 spindle thread accessories, including the TORQ10FX, TORQX, and Porter Cable 7424XP dual action polishers. The advanced backing plate design uses high-strength high-density foam for extreme durability and extended performance at high polishing RPMs. Specialty air channels funnel in fresh air to cool the backing plate, polishing machine, and buffing pad for reduced wear and tear during long polishing jobs. Hyper-Flex Technology allows the backing plate to flex and conform to every vehicle curve and contour, ensuring maximum buffing pad contact and a finer finish in less time than traditional backing plate designs. Simply attach the small 3'' backing plate to run 3’’ - 4.5’’ buffing pads and scrubbing brushes in small and hard to reach areas. Tackle any polishing, cleaning, and waxing job quickly and easily with your favorite dual action polisher and the best backing plate for your small buffing pads and accessories: the TORQ R5 3'' Dual Action Backing Plate with Hyper Flex Technology

What Machines Is This Backing Plate For?

The TORQ R5 3'' Dual Action Backing Plate fits any DA polisher that accepts 5/16’’ - 24 spindle accessories:

  • TORQ10FX
  • TORQX
  • Porter Cable 7424XP
  • Griot’s 6’’
  • Meguiar’s G110
  • Meguiar’s MT300

How To Use:

  • Insert DA polisher wrench between the counterweight housing and backing plate.
  • Hold the spindle with the wrench and unscrew the backing plate by hand.
  • Line up the backing plate spindle thread and screw directly into the DA spindle.
    • Make sure the included washer stays in place around the backing plate threads.
    • This washer ensures proper clearance between the DA machine housing and the backing plate.
  • Continue counter-holding the DA spindle with the wrench and screw backing plate in tightly by hand.
  • Test fitment by turning machine by hand and make necessary adjustments if machine binds up.

 

  • Item #: BUFLC_200

Dual-Action Red Backing Plate (3 inch)

Price: $12.99
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review